Nortel 222 用户指南
Installing the Element Manager
21
Device
type
type
Default IP
address
address
IP address
range
range
DHCP/BOOTP
Notes
the addre
sses to be
consecutive
within this
range.
sses to be
consecutive
within this
range.
Installing the Element Manager
The Element Manager 1.0 supports all SMB data products (BSR222,
BES50/100/200/1000, and BAP120) as well as BCM50 1.0 and 2.0, and
BCM 4.0. However, the BCM Element Manager does not support SMB
devices.
BES50/100/200/1000, and BAP120) as well as BCM50 1.0 and 2.0, and
BCM 4.0. However, the BCM Element Manager does not support SMB
devices.
ATTENTION
The Element Manager 1.0 must be installed on your computer if you want to
manage both SMB data products and existing BCM devices.
manage both SMB data products and existing BCM devices.
Prerequisites
The following items are required before you can install the Element Manager.
•
System requirements:
— Windows: Windows 98 SE™, Windows 2000™, Windows XP™
— RAM: minimum 256 MB, recommended 512 MB
— Free space: 150 MB
•
Element Manager software downloaded from
www.nortel.com/support.
Procedure steps
Step
Action
1
Double-click the Element Manager Installer icon and click Run.
2
In the Install Wizard
a. Read through the Introduction page and click Next.
b. Read through the License Agreement page and click Next.
c. Choose the install folder and click Next.
d. Click On the Desktop to choose the shortcut folder.
e. Review the Pre-Installation Summary and click Install.
—End—
SMB
Small and Medium Business Solutions Overview and Configuration Guide
NN47910-200
02.01
Standard
Release 1.00
11/22/2006
Copyright © 2006, Nortel Networks
Nortel Networks Confidential
.