Nortel 4134 用户指南
Configuring L2TP server for L2TP remote access
161
Configuring client parameters for L2TP remote access
Configure the client parameters for remote access with L2TP.
Procedure steps
Step
Action
1
To enter the configuration mode, enter:
configure terminal
2
To select the L2TP access virtual interface, enter:
interface l2tp-server <server-name>
3
To select L2TP client configuration, enter:
remote-config {domain-name <domain-name>}
4
To configure L2TP client parameters, enter:
{address-pool <first-address> <last-address> | dns
<A.B.C.D> | nbns <A.B.C.D>}
—End—
Table 86
Variable definitions
Variable definitions
Variable
Value
address-pool
<first-address>
<last-address>
<first-address>
<last-address>
Pool of IP addresses given to connecting clients.
dns <A.B.C.D>
DNS address the client will use.
nbns <A.B.C.D>
Net Bios Name Server (WINS server) the client will
use.
use.
Configuring user parameters for L2TP remote access
Configure user parameters for remote access using L2TP.
Procedure steps
Step
Action
1
To enter the configuration mode, enter:
configure terminal
2
To select the L2TP access virtual interface, enter:
interface l2tp-server <server-name>
Nortel Secure Router 4134
Security — Configuration and Management
NN47263-600
01.02
Standard
10.0
3 August 2007
Copyright © 2007, Nortel Networks
.