Nortel 4134 用户指南
Configuring CA trustpoint
167
Procedure steps
Step
Action
1
To enter the configuration mode, enter:
configure terminal
2
To specify crypto configuration for IPsec and IKE, enter:
crypto
3
To specify the CA trustpoint to configure, enter:
ca trustpoint <ca-name>
4
To configure the IP address, enter:
[no] ip-address <A.B.C.D>
—End—
Configuring fully-qualified domain name as subjectAltName for
the certificate
the certificate
Specify the fully qualified domain name as the subjectAltName to be used
in the certificate request. To clear the FQDN from the configuration, use
the no form of the command.
in the certificate request. To clear the FQDN from the configuration, use
the no form of the command.
Procedure steps
Step
Action
1
To enter the configuration mode, enter:
configure terminal
2
To specify crypto configuration for IPsec and IKE, enter:
crypto
3
To specify the CA trustpoint to configure, enter:
ca trustpoint <ca-name>
4
To configure the fully-qualified domain name, enter:
[no] fqdn <fqdn>
—End—
Nortel Secure Router 4134
Security — Configuration and Management
NN47263-600
01.02
Standard
10.0
3 August 2007
Copyright © 2007, Nortel Networks
.