Nortel 4134 用户指南
194
PPPoE client configuration
Table 98
Variable definitions
Variable definitions
Variable
Value
[pap | chap | pap_chap
| none]
| none]
Specifies the authentication method: one of PAP,
CHAP, either, or none.
CHAP, either, or none.
[sent-username
<username>]
<username>]
Specifies the local username to be authenticated
(max is 64 characters). This parameter is required
for all authentication types, unless
(max is 64 characters). This parameter is required
for all authentication types, unless
none
is specified.
[password <password>]
Specifies the local password to be authenticated
(max is 64 characters). This parameter is required
for all authentication types, unless
(max is 64 characters). This parameter is required
for all authentication types, unless
none
is specified.
Configuring PPPoE access concentrator
Configure a specific PPPoE server.
Procedure steps
Step
Action
1
To enter configuration mode, enter:
configure terminal
2
To specify the name of the PPPoE interface to configure, enter:
interface virtual-access <pppoe-interface>
3
To configure access concentrator for PPPoE, enter:
pppoe ac-name <ac-name>
—End—
Table 99
Variable definitions
Variable definitions
Variable
Value
<ac-name>
Specifies the PPPoE access concentrator name
(max 32 characters).
(max 32 characters).
Configuring PPP keepalive
Configure the PPP keepalive interval in seconds. This value specifies the
amount of time PPP stays up when there is no traffic.
amount of time PPP stays up when there is no traffic.
Nortel Secure Router 4134
Security — Configuration and Management
NN47263-600
01.02
Standard
10.0
3 August 2007
Copyright © 2007, Nortel Networks
.