Nortel 4134 用户指南
Configuring 802.1x on an Ethernet interface
209
3
To configure the TACACS+ timeout in seconds, enter:
time_out <1-300>
—End—
Configuring 802.1x
Globally enable or disable 802.1x authentication. By default, 802.1x
authentication is disabled.
authentication is disabled.
Procedure steps
Step
Action
1
To enter configuration mode, enter:
configure terminal
2
To enable or disable 802.1x, enter:
dot1x [enable | disable]
—End—
Configuring 802.1x on an Ethernet interface
EAP IEEE 802.1x can be applied to Ethernet interfaces only.
Enable 802.1x on the interface
Enable or disable 802.1x on the interface.
Procedure steps
Step
Action
1
To enter configuration mode, enter:
configure terminal
2
To specify the Ethernet interface to configure, enter:
interface ethernet <slot/port>
3
To specify 802.1x configuration, enter:
dot1x
4
To enable or disable 802.1x on the interface, enter:
[no] dot1x-enable
Nortel Secure Router 4134
Security — Configuration and Management
NN47263-600
01.02
Standard
10.0
3 August 2007
Copyright © 2007, Nortel Networks
.