Nortel 4134 用户指南
Configuring global properties
87
configure terminal
2
To specify global firewall configuration, enter:
firewall global
3
To specify global IP reassembly configuration, enter:
ip-reassembly
4
To configure timeout, enter:
timeout <11-120>
—End—
Table 19
Variable definitions
Variable definitions
Variable
Value
<11-120>
Time value in seconds (default: 60)
Configuring global logging
Configuring the logging threshold for attacks
Configure a threshold for logging attacks to control the recording of attack
logs. Whenever the number of attacks reaches the configured threshold
value, a log message is generated. By default, logged information is written
to console. If a syslog server is configured, the log information is directed to
the syslog server and the console.
logs. Whenever the number of attacks reaches the configured threshold
value, a log message is generated. By default, logged information is written
to console. If a syslog server is configured, the log information is directed to
the syslog server and the console.
Procedure steps
Step
Action
1
To enter configuration mode, enter:
configure terminal
2
To specify global firewall configuration, enter:
firewall global
3
To specify global logging configuration, enter:
logging
4
To configure attack logging, enter:
attacks <1-2147483647>
—End—
Nortel Secure Router 4134
Security — Configuration and Management
NN47263-600
01.02
Standard
10.0
3 August 2007
Copyright © 2007, Nortel Networks
.