Nortel 4134 安装指导
Replacing the internal Compact Flash
65
5
Firmly grasp the DIMM by its edges and pull straight up to remove
the DIMM from the slot.
the DIMM from the slot.
6
Insert the replacement DIMM in the slot, pushing down firmly but
gently to fully seat the DIMM in the slot.
The release latches close when the DIMM is properly installed.
gently to fully seat the DIMM in the slot.
The release latches close when the DIMM is properly installed.
—End—
Replacing the internal Compact Flash
Use the instructions in this section if you must replace the internal Compact
Flash. This internal device is not hot-swappable.
Flash. This internal device is not hot-swappable.
Average time to replace the internal Compact Flash: 1 minute
Nortel Secure Router 4134
Installation — Hardware Components
NN47263-301
01.02
Standard
10.0
7 August 2007
Copyright © 2007, Nortel Networks
.