Nortel 2350 参考指南
Planning the Nortel WLAN 2300 System 151
Nortel WLAN—Management Software 2300 Series Reference Guide
To place an RF measurement point
1
Display the floor plan in the Content panel.
2
In the Task List panel, click Tools.
3
In the Coverage Area task group, under Wiring Closet/Misc, click the
(Insert Measurement Point)
icon.
4
On the floor plan, click where you want the measurement point to be placed. The Create RF Measurement
Point dialog box appears.
Point dialog box appears.
5
In the Description box, type a description for the measurement point (1 to 60 characters).
6
In the RSSI Options box, select display options for the dialog box:
•
To list access points that cannot be detected from this RF measurement point, select Show
Unreachable APs.
Unreachable APs.
•
To list disabled access points, select Show Disabled APs.