Nortel 2350 参考指南
Configuring Wireless Parameters 227
Nortel WLAN—Management Software 2300 Series Reference Guide
c
Select Wireless Services.
d
In the Task List panel, select 802.1X Service Profile.
2
Read the description of the wizard on the first page, then click Next.
3
Edit the service name in the Name box.
Editing the name is optional if this is the first service of this type you are configuring on the
switch.
switch.
4
Type the SSID name in the SSID box.
5
Click Next.
6
Select the security modes you want the SSID to support. You can select one or more of the
following:
following:
•
RSN (WPA2)
•
WPA
•
Dynamic WEP
7
Click Next.
8
If you selected RSN or WPA in
, select the encryption algorithms to use. Otherwise, go to
•
AES (CCMP)—Usually used with RSN (WPA2)
•
TKIP—Usually used with WPA
•
WEP-104—Used with dynamic WEP
•
WEP-40—Used with dynamic WEP
9
Click Next.
10 Select the EAP type:
•
EAP-MD5 Offload
•
PEAP Offload
•
Local EAP-TLS
•
External RADIUS Server
If you select PEAP, the EAP Sub-Protocol is MS-CHAPV2. For other protocols, the EAP
Sub-Protocol is None.
Sub-Protocol is None.
(For information, see
11 Specify the authentication method (RADIUS server group or local database).
(For information, see
12 Click Next.
13 To assign a default VLAN to the SSID, select the VLAN from the VLAN Name drop-down list.
13 To assign a default VLAN to the SSID, select the VLAN from the VLAN Name drop-down list.
The VLAN and other authorization attributes can be assigned to users in the local database, on
remote servers, or in the service profile of the SSID the user logs into. The VLAN you select
here is used only if a VLAN attribute is not configured for the user on the RADIUS server or in
the switch’s local database.
remote servers, or in the service profile of the SSID the user logs into. The VLAN you select
here is used only if a VLAN attribute is not configured for the user on the RADIUS server or in
the switch’s local database.