Nortel 2350 参考指南
286 Configuring Authentication, Authorization, and Accounting Parameters
NN47250-102 (320666-G Version 02.01)
Viewing RADIUS Settings, Servers, and Server Groups
1
Select the Configuration tool bar option.
2
In the Organizer panel, click the plus sign next to the WSS.
3
Click the plus sign next to AAA.
4
Select RADIUS.
The RADIUS servers, server groups, and default settings appear.
Creating a RADIUS Server
1
Access the Create RADIUS Server wizard:
a
Select the Configuration tool bar option.
b
In the Organizer panel, click the plus sign next to the WSS.
c
Click the plus sign next to AAA.
d
Select RADIUS.
e
In the Task List panel, select Create RADIUS Server.
2
In the Name box, type the name of an existing RADIUS server (1 to 64 alphanumeric characters, with no
spaces or tabs). Do not use the same name for a RADIUS server and a RADIUS server group.
spaces or tabs). Do not use the same name for a RADIUS server and a RADIUS server group.
3
In the IP Address box, type the IP address for the RADIUS server, in dotted decimal notation.
4
Click Next.
WLAN Management Software suggests the name of a server group to place the server in. The server
group is required because AAA rules refer to server groups, not to individual servers.
group is required because AAA rules refer to server groups, not to individual servers.
5
If necessary, edit the server group name.
6
Click Finish.
Modifying a RADIUS Server
1
In the content panel, select the RADIUS server you want to modify and click Properties.
2
In the IP Address box, type the IP address for the RADIUS server, in dotted decimal notation.
3
In the Key box, type the password (also known as a shared secret key) used to authenticate to the
RADIUS server (1 to 32 characters long, with no spaces or tabs).
RADIUS server (1 to 32 characters long, with no spaces or tabs).
You must provide the same password that is defined on the RADIUS server.
4
In the Timeout box, specify how long (1 to 65,535 seconds) the WSS must wait for a RADIUS server to
respond before retransmitting. The default is 5 seconds.
respond before retransmitting. The default is 5 seconds.
5
In the Authentication Port box, specify the UDP destination port to which the WSS listens for
authentication and authorization. The default port is 1812.
authentication and authorization. The default port is 1812.
6
In the Accounting Port box, specify the UDP destination port to which the WSS listens for accounting.
The default port is 1813.
The default port is 1813.
7
In the Retry Count box, specify how many retransmissions (1 to 100) are sent for a RADIUS request. The
default is 2.
default is 2.