Nortel 2350 参考指南
334 Managing WSS System Images and Configurations
NN47250-102 (320666-G Version 02.01)
The configuration is saved in the directory that you specified.
9
To close the Export Configurations dialog box, click Close.
Modifying Configuration Change Polling Options
By default, WLAN Management Software client polls WSSs in the network every 15 minutes for network changes, and
displays a popup message if changes are detected. The popup message is in addition to notification in the Alerts panel.
displays a popup message if changes are detected. The popup message is in addition to notification in the Alerts panel.
To modify configuration polling options
1
Select the Devices tool bar option.
2
Click Edit managed devices options on the Devices tab’s toolbar. The Managed Device Options dialog
box appears.
box appears.
3
Click Options on the Devices tab’s toolbar. The Managed Device Options dialog box appears.
4
To enable the detection of configuration changes in the network, make sure Enabled is selected next to
Poll for configuration changes.
Poll for configuration changes.
5
To specify how often network checks occur, specify the interval between checks, from 1 to 1440 minutes
(24 hours), in the Interval box. The default is 15 minutes.
(24 hours), in the Interval box. The default is 15 minutes.
6
To be notified of network changes by a popup message, select Prompt when network changes are
detected.
detected.
To disable the popup message, deselect the option.
7
To instruct WSSs to save deployed configuration changes in their configuration files, select Save WSS
Configuration on Deploy.
Configuration on Deploy.
8
Click Close.
Note.
Disabling the popup message does not affect the Network Changes
information in the Alerts panel. The Alerts panel still notifies you of network
changes.
changes.