Nortel 2350 参考指南

346 Configuring and Applying Policies

NN47250-102 (320666-G Version 02.01)

Access the Create Policy wizard.
a

Select the Policies tool bar option.

In the Policy DB Tasks List panel, select Create Policy.

In the Policy Name box, type a name for the policy. This name will appear in the Organizer panel when 
the Policies tool bar option is selected.

To configure a policy for a specific switch model, select the model from the WSS Model Filter drop-down 
list.

To configure the policy to support an older version of WLAN Management Software than is currently 
running, select the version from the WSS Version Filter drop-down list.

Click Next.

Select the feature areas you want to set in the policy.

When you apply the policy to a switch, all parameter settings from all the feature areas you select are 
applied to the switch. This includes any settings you leave at their default settings in the policy.

Click Next.

In Available Devices list, select the switches to which you want to apply the policy, then click Add to 
move the switches to the Current Devices list. 

Click Finish and go to 

If you have not already done so, use the procedure in 

 to configure a policy 

and select the switches to which you want to apply the policy.

In the Organizer panel, select a feature area.

Use the Content panel or wizards accessed from the Task List panel to configure settings for the feature 
category. 

To find information about a feature category, see 

Click Save to save the changes to the policy.

In the Task List panel, select View to display the switches to which the policy change will apply. 

Only the settings you change from their default values are listed. 

After you review the changes, click Close.

Correct any changes if needed, then go to 

.

Moving a switch to the Current Devices list does not automatically apply 

the policy to the switch. To apply policy settings, see