Nortel 2350 参考指南

Generating Reports 389

Nortel WLAN—Management Software 2300 Series Reference Guide

Select the scope for the work order. You can select the network plan, a site, a building, or an individual 
floor.

Select the language:

To change the output directory for the report, click on the button next to output directory, navigate to the 
new directory, and click Select.

Click Generate. 

When the report is generated, click View. A browser window containing the report opens. 

Optionally, select the floor. 

10 Click Site Survey Order. The site survey order appears. LOS point information for the selected floor is 

displayed.

Scroll down to view the MAC address assignments for the LOS points. 

Use the instructions in the Ekahau Site Survey Initial Setup section of the work order to set up the survey. 

A work order provides all of the necessary information for the physical installation of the Nortel WLAN 2300 System. A 
work order shows where the APs should be installed, WSS initial setup configuration information, and projected RSSI 
information that is useful when verifying the installation. 

Select the Reports tool bar option.

In the Reports list, select Work Order.

Click Generate.

Select the scope for the work order. You can select the network plan, a site, a building, or an individual 
floor.

Select the options you want to use for the report:

When you import the floor map into the site survey tool, make sure you 

use the map name specified in the work order. The site survey data will not appear 
when you import RF measurements into WLAN Management Software unless the 
map name is correct.

The work order has meaning only after you add planning information. (See