Nortel 2350 参考指南
Working with Network Plans 71
Nortel WLAN—Management Software 2300 Series Reference Guide
3
In the Task List panel, select Country Code. The Change Country Code wizard appears.
4
Select the country code from the drop-down list. For a complete listing of the two-letter country codes,
refer to the "Approved Countries for the WLAN 2300 Series Components" at
refer to the "Approved Countries for the WLAN 2300 Series Components" at
:
http://www.nortel.com/support.
5
Click Next.
WLAN Management Software changes the country code on all the WSSs in the network plan, and lists its
progress as it does so.
progress as it does so.
6
Click Finish.
Applying the Network’s Auto-RF Settings to the Network
Plan
Plan
If Auto-RF is running on AP radios in the network, you can update the radios in the network plan with the channel and
power settings currently in effect on the same radios in the network. You also can lock down the channel and power
settings in the plan and in the network by disabling Auto-RF on the radios.
power settings currently in effect on the same radios in the network. You also can lock down the channel and power
settings in the plan and in the network by disabling Auto-RF on the radios.
1
Select the Configuration tool bar option.
2
In the Organizer panel, select the network plan name.
3
In the Task List panel, select Disable Auto-Tune. The Disable Auto-Tune wizard appears.
4
Select the Auto-RF settings you want to apply. Both channel and power settings are selected by default.
5
Select the scope:
•
Mobility Domain
Note.
A regional regulatory lock function has been implemented in the Series
2332 access points to manage the various worldwide operating channels and
country approval requirements. The regional lock function contains sixteen (16)
regions that are grouped by their operating frequency channels in the 2.4 GHz and
5.0 GHz bands for indoor operation. When selecting a country code, be sure that
the access point model contains that country or the access point will not operate.
For a complete listing of the access point models and their associated countries
please visit
country approval requirements. The regional lock function contains sixteen (16)
regions that are grouped by their operating frequency channels in the 2.4 GHz and
5.0 GHz bands for indoor operation. When selecting a country code, be sure that
the access point model contains that country or the access point will not operate.
For a complete listing of the access point models and their associated countries
please visit
http://www.nortel.com/support
.
Note.
Auto-RF settings are applied only to configured APs, not to Auto DAPs
(Distributed APs configured using a Distributed AP profile).
Note.
This option also disables Auto-RF on the radios. When Auto-RF is disabled, the
channel and power settings on the radios are static.