Nortel 2350 用户指南

100 Configuring and managing ports and VLANs

NN47250-500 (320657-F Version 02.01)

You can display port statistics in a format that continually updates the counters. When you enable monitoring 
of port statistics, WSS Software clears the CLI session window and displays the statistics at the top of the 
window. WSS Software refreshes the statistics every 5 seconds. This interval cannot be configured.

To monitor port statistics, use the following command:

Statistics types are displayed in the following order by default:

•

Octets

•

Packets

•

Receive errors

•

Transmit errors

•

Collisions

•

Receive Ethernet statistics

•

Transmit Ethernet statistics

Each type of statistic is displayed separately. Press the Spacebar to cycle through the displays for each type. 

If you use an option to specify a statistic type, the display begins with that statistic type. You can use one 
statistic option with the command. 

Use the keys listed in 

 to control the monitor display.

To monitor port statistics beginning with octet statistics (the default), type the following command:

WSS

As soon as you press Enter, WSS Software clears the window and displays statistics at the top of the window. 
In this example, the octet statistics are displayed first. 

Spacebar

Advances to the next statistics type.

Esc

Exits the monitor. WSS Software stops displaying the statistics 
and displays a new command prompt.

c

Clears the statistics counters for the currently displayed statistics 
type. The counters begin incrementing again.

Port    Status                       

Rx Octets                          

Tx Octets

      1   

Up                          

27965420                        

34886544