Nortel 2350 用户指南

112 Configuring and managing ports and VLANs

NN47250-500 (320657-F Version 02.01)

For example, to display the number of dynamic entries that the forwarding database contains, type the 
following command:

WSS

Total Matching Entries = 2

To display the entries in the forwarding database, use either of the following commands:

show fdb [mac-addr-wildcard [vlan vlan-id]]

show fdb {perm | static | dynamic | system | all} [port port-list | vlan vlan-id]

The mac-addr-wildcard parameter can be an individual address, or a portion of an address with the asterisk (*) 
wildcard character representing from 1 to 5 bytes. The wildcard allows the parameter to indicate a list of MAC 
addresses that match all the characters except the asterisk. 

Use a colon between each byte in the address (for example, 11:22:33:aa:bb:cc or 11:22:33:*). You can enter 
the asterisk (*) at the beginning or end of the address as a wildcard, on any byte boundary.

To display all entries in the forwarding database, type the following command:

WSS

# show fdb all

* = Static Entry. + = Permanent Entry. # = System Entry.

Total Matching FDB Entries Displayed = 3

To display all entries that begin with 00, type the following command:

WSS# show fdb 00:*

* = Static Entry. + = Permanent Entry. # = System Entry.

Total Matching FDB Entries Displayed = 2

VLAN 

TAG  

Dest MAC/

Route 

Des [CoS]  

Destination 

Ports        

[Protocol Type]

   1       00:01:97:13

:0b:1f               

 

1

[ALL]

   1       aa:bb:cc:dd:

ee:ff      

*        

3                       

[ALL] 

   1       00:0b:0e:02

:76:f5               

1

[ALL]

VLAN 

TAG  

Dest MAC/Route 

Des [CoS]  

Destination Ports        

[Protocol  Type]

   1      

00:01:97:13:0b:1f    

           

1                      

[ALL]

      1           

00:0b:0e:02:76:f5               

 

1 

[ALL]