Nortel 2350 用户指南

Configuring APs 275

Nortel WLAN—Security Switch 2300 Series Configuration Guide

WSS# show ap unconfigured 
Total number of entries: 2
Serial Id   Model  IP Address      Port Vlan
----------- ------ --------------- ---- --------
0333001287  2330 10.3.8.54       5    default
0333001285  2330 10.3.8.57       7  vlan-eng

A AP can have only one active data connection. To display the system IP address of the WSS that has the active connec-
tion (the switch that booted the AP), use the following command:

show ap connection [ap-num | serial-id serial-ID]

The serial-id parameter displays the active connection for a Distributed AP even if that AP is not configured on this 
WSS. However, if you use the command with the ap-num parameter or without a parameter, connection information is 
displayed only for APs that are configured on this WSS.

This command provides information only if the AP is configured on the switch where you use the command. The switch 
does not need to be the one that booted the AP, but it must have the AP in its configuration. Also, the switch that booted 
the AP must be in the same Mobility Domain as the switch where you use the command.

To display service profile information, use the following command:

Entering show service-profile ? displays a list of the service profiles configured on the switch.

To display information for service profile sp1, type the following command:

WSS# show service-profile sp1

ssid-name:            

 

corp2 

ssid-type:                      crypto

Beacon:                           

 yes   

Proxy ARP:                          no

DHCP restrict:                      

no  

 No broadcast:                       no

Short retry limit:                   

5   

Long retry limit:                    5

Auth fallthru:                   

 none   

Sygate On-Demand (SODA):            no

Enforce SODA checks:               yes   

SODA remediation ACL:

Custom success web-page:                 

Custom failure web-page:

Custom logout web-page:                  

Custom agent-directory:

Static COS:                         

no   

COS:                                 0

CAC mode:                         

none   

 CAC sessions:                       14

User idle timeout:                 

180  

 Idle client probing:               yes

Keep initial vlan:                 

 no   

Web Portal Session Timeout:          5

Web Portal ACL:
WEP Key 1 value:                 <none>  

  WEP Key 2 value:                <none>

WEP Key 3 value:                 <none>   

WEP Key 4 value:                <none>

WEP Unicast Index:                   1   

 WEP Multicast Index:                 1

Shared Key Auth:                    NO
WPA enabled:
ciphers: cipher-tkip
authentication: 802.1X
TKIP countermeasures time: 60000ms