Nortel 2350 用户指南

Configuring WLAN mesh services 285

Nortel WLAN—Security Switch 2300 Series Configuration Guide

Configure the Mesh Portal AP to beacon the mesh services SSID. To do this, create a service profile and enable mesh 
services using the following commands:

set service-profile mesh-service-profile ssid-name mesh-ssid

set service-profile mesh-service-profile mesh mode {enable | disable}

Then, service profile can be mapped to a radio profile, that manages a radio on the Mesh Portal AP. 

The radio profile mapped to the service profile cannot be configured to 

auto-tune power or channel settings.