Nortel 2350 用户指南

362 Configuring quality of service

NN47250-500 (320657-F Version 02.01)

WSS# show radio-profile rp1

Beacon Interval:                   100   DTIM Interval:                       1
Max Tx Lifetime:                  2000   Max Rx Lifetime:                  2000
RTS Threshold:                    2346   Frag Threshold:                   2346
Long Preamble:                      no   Tune Channel:                      yes
Tune Power:                         no   Tune Channel Interval:            3600
Tune Power Interval:               600   Power ramp interval:                60
Channel Holddown:                  300   Countermeasures:                  none
Active-Scan:                       yes   RFID enabled:                       no
WMM Powersave:                      no   QoS Mode:                          wmm

Service profiles: sp1

In this example, the QoS mode is WMM and U-APSD support (WMM powersave) is disabled. 

(For more information about this command’s output, see the “AP Commands” chapter in the 

.)

To display QoS settings and all other settings for a service profile, use the following command:

show service-profile {name | ?}

The following example shows the configuration of the sp1 service profile.

WSS# show service-profile sp1

ssid-name:            

corp2 ssid-type:                      crypto

Beacon:                            yes   Proxy ARP:                          no
DHCP restrict:                      no   No broadcast:                       no
Short retry limit:                   5   Long retry limit:                    5
Auth fallthru:                    none   Sygate On-Demand (SODA):            no
Enforce SODA checks:               yes   SODA remediation ACL:
Custom success web-page:                 Custom failure web-page:
Custom logout web-page:                  Custom agent-directory:
Static COS:                         no   COS:                                 0
CAC mode: 

User idle timeout:                 180   Idle client probing:               yes
Keep initial vlan:                  no   Web Portal Session Timeout:          5
Web Portal ACL:
WEP Key 1 value:                <none>   WEP Key 2 value:                <none>
WEP Key 3 value:                <none>   WEP Key 4 value:                <none>
WEP Unicast Index:                   1   WEP Multicast Index:                 1
Shared Key Auth:                    NO
WPA enabled:
    ciphers: cipher-tkip
    authentication: 802.1X
    TKIP countermeasures time: 60000ms
11a beacon rate:                   6.0   multicast rate:                   AUTO
11a mandatory rate: 6.0,12.0,24.0 standard rates: 9.0,18.0,36.0,48.0,54.0
11b beacon rate:                   2.0   multicast rate:                   AUTO
11b mandatory rate: 1.0,2.0 standard rates: 5.5,11.0
11g beacon rate:                   2.0   multicast rate:                   AUTO
11g mandatory rate: 1.0,2.0,5.5,11.0 standard rates: 6.0,9.0,12.0,18.0,24.0, 36.0,48.0,54.0