Nortel 2350 用户指南
Configuring and managing IGMP snooping 405
Nortel WLAN—Security Switch 2300 Series Configuration Guide
Displaying multicast receivers
To display information about the multicast receivers only without also displaying all the other multicast information, use
the following command:
the following command:
show igmp receiver-table [vlan vlan-id]
[group group-ip-addr/mask-length]
Use the group parameter to display receivers for a specific group or set of groups. For example, to display receivers for
multicast groups 237.255.255.1 through 237.255.255.255, in all VLANs, type the following command:
multicast groups 237.255.255.1 through 237.255.255.255, in all VLANs, type the following command:
WSS# show igmp receiver-table group 237.255.255.0/24
VLAN: red
Session
VLAN: red
Session
Port
Receiver-IP Receiver-MAC
TTL
--------------- -------
---------------
------------------------
--------
237.255.255.2 2
10.10.20.19
00:02:04:06:09:0d
112
237.255.255.119 3
10.10.30.31
00:02:04:06:01:0b
112
VLAN: green
Session
Session
Port
Receiver-IP Receiver-MAC
TTL
--------------- -------
---------------
------------------------
--------
237.255.255.17
11
10.10.40.41
00:02:06:08:02:0c
12
237.255.255.255
6
10.10.60.61
00:05:09:0c:0a:01
111
(For information about the fields in the output, see the
Nortel WLAN Security Switch 2300 Series Command Line
Reference
.)