Nortel 2350 用户指南
516 Configuring AAA for network users
NN47250-500 (320657-F Version 02.01)
Configuring last-resort access for wired authentication ports
To configure a wired authentication port to allow last-resort access:
•
Set the fallthru authentication type on the port to last-resort.
•
Create a user named last-resort-wired in the switch’s local database.
The following commands configure wired authentication port 5 for last-resort access and add the special user:
WSS
# set port type wired-auth 5 auth-fall-thru last-resort
success: change accepted.
WSS
# set user last-resort-wired attr vlan-name guest-vlan2
success: change accepted.
Configuring AAA for users of third-party APs
A WSS can provide network access for users associated with a third-party AP that has authenticated the users with
RADIUS. You can connect a third-party AP to a WSS and configure the WSS to provide authorization for clients who
authenticate and access the network through the AP.
RADIUS. You can connect a third-party AP to a WSS and configure the WSS to provide authorization for clients who
authenticate and access the network through the AP.
shows an example.
Figure 3.
WSS serving as RADIUS proxy
WSS
Wired Layer 2
connection
connection
RADIUS server
Layer 2
or Layer 3
or Layer 3