Nortel 2526T 参考指南
Before you begin
17
•
The rack must be bolted to the floor and braced, if necessary.
•
The rack must be grounded to the same grounding electrode used by
the power service in the area. The ground path must be permanent and
must not exceed 1 ohm of resistance from the rack to the grounding
electrode.
the power service in the area. The ground path must be permanent and
must not exceed 1 ohm of resistance from the rack to the grounding
electrode.
The following figures provide instruction for installing the switch in a rack.
Attach a bracket to each side of the switch.
Slide the switch into the rack. Insert and tighten the rack mount screws.
Nortel Ethernet Routing Switch 2500 Series
Regulatory Information for the Nortel Ethernet Routing Switch 2500 Series
NN47215-100 (323169-B)
02.01
Standard
4.1
19 November 2007
Copyright © 2007, Nortel Networks
.