Nortel 4000 发行公告
300115-B Rev. A
Remote Access Software Version 5.3 Release Notes
28
This should be done only when normal operation is not possible and
the telco indicates that such a conversion is taking place. Enabling this
feature may result in an inability to achieve connect speeds in excess
of 31.2 Kb/s. In addition, as in any situation where a downlink digital
to analog conversion (PCM hop) is made, 56K (V.pcm) connections
are not possible.
0 - Disable
1 - Enable
the telco indicates that such a conversion is taking place. Enabling this
feature may result in an inability to achieve connect speeds in excess
of 31.2 Kb/s. In addition, as in any situation where a downlink digital
to analog conversion (PCM hop) is made, 56K (V.pcm) connections
are not possible.
0 - Disable
1 - Enable
FE: Far End Echo Canceller
0: Disable
1: Enable
1: Enable
FP: Far End Echo PLL
0: Disable
1: Enable
1: Enable
Parameter 39
Default config_bytes Setting:
Decimal base: 12
Octal base: 014
Hexadecimal base: 0xC
Octal base: 014
Hexadecimal base: 0xC
Transmit Power, -dB
110: High Power Level
1100: Low Power Level
1100: Low Power Level
Bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Value
0
0
0
0
0
0
0 0 0
0 0 0 1 1 0 0
Descr.
Unused
Transmit Power