Nortel 4000 发行公告
300115-B Rev. A
Remote Access Software Version 5.3 Release Notes
82
IBM Requirements
Annex Manager runs on IBM RS/6000 workstations under AIX 4.1.4 and
4.1.5.
4.1.5.
Remote Display Requirements
If you use Annex Manager on an X Windows terminal, Bay Networks
recommends that you have more than 2MB of RAM to avoid problems
when you have multiple windows open simultaneously.
recommends that you have more than 2MB of RAM to avoid problems
when you have multiple windows open simultaneously.
New Features and Commands
Annex Manager Release 3.1 supports the model 5399 and model 8000
RACs. For more information on the new RAC product features and
commands, please see other sections of these release notes and the revised
Annex Manager User’s Guide included with your documentation.
RACs. For more information on the new RAC product features and
commands, please see other sections of these release notes and the revised
Annex Manager User’s Guide included with your documentation.
Known Problems/Limitations
The following items are problems and limitations of Annex Manager
Release 3.1:
Release 3.1:
•
If you select a PRI-supporting unit (RA 6300, RA 5393, 5399
RAC, or 8000 RAC) and you change the switch type, you
should ignore the resulting error message:
RAC, or 8000 RAC) and you change the switch type, you
should ignore the resulting error message:
<annex_name (node port 0)> anxt1CasDnisDigits :
Parameter cannot be set: it does not exist or is read-
only.
There was an error setting one or more parameters.
This may be due to a timeout.
•
There is no online help available for the Reset options, which
follow editing the configuration file. If you change the
configuration file using Annex Manager, a dialog box appears
with the various Reset options that you can select.
follow editing the configuration file. If you change the
configuration file using Annex Manager, a dialog box appears
with the various Reset options that you can select.