Nortel 4000 用户指南

Managing Remote Access Concentrators Using Annex Manager

Chapter 6    Viewing and Changing SNMP Information

6-2

This section describes how to change SNMP information for one or more
RACs.

Annex Manager saves the values you change using

SNMP

Information

 for an active session only. When you exit Annex

Manager, the original

Timeout, Retries

, and

Community String

 values

are reinstated.

SNMP Information

 uses these text fields:

•

Timeout

 specifies the length of time in seconds that Annex

Manager waits for a response. You can enter a number of
seconds here. If you leave this field blank,

SNMP Information

uses the Annex Manager five-second default.

•

Retries

 controls the number of times that Annex Manager tries

to reach a RAC or other device on the network. You can enter a
number here. If you leave this field blank, the command uses
the Annex Manager default of 0 (zero) retries.

•

Community String

 specifies the SNMP password Annex Manager

uses to communicate with RACs. You can enter a new string
here. If you do not complete this field, Annex Manager uses

public

, which is the default community string.

The initial

SNMP Information

 window does not include values for

these fields.

To change RAC values:

Create an Annex list (page 2-1) and select one or more RACs.

If you want to update only RAC defaults, skip this step.

Main

SNMP

Information

The

SNMP Information

 window appears (Figure 3-1).

Timeout

Retries

Community String

Update Selected Annex(es) on Apply

Update Default Values on Apply