Nortel 4000 用户指南
Managing Remote Access Concentrators Using Annex Manager
Appendix A RAC Parameters
A-20
CallDef_latb_enable
allows a RAC or an ISDN Primary Rate RAC to decode the LAT host data-b
packets, which change asynchronous call parameters. Refer to the documentation
of your LAT host.
packets, which change asynchronous call parameters. Refer to the documentation
of your LAT host.
If you enter
enabled
and the LAT host sends a data-b slot message
requesting that flow control (XON/XOFF) be turned off, the RAC
turns off flow control and passes XON/XOFF characters to the host.
This scenario can adversely affect XON/XOFF and the terminal
cursor keys.
turns off flow control and passes XON/XOFF characters to the host.
This scenario can adversely affect XON/XOFF and the terminal
cursor keys.
CallDef_line_erase
allows a RAC or an ISDN Primary Rate RAC using CLI to echo line erase for a
video terminal. If you choose
video terminal. If you choose
enabled
, the RAC erases all characters on the line
and moves the cursor back to the beginning of the line. If you choose
disabled
,
it echoes the line erase character for hard-copy terminals, making the deleted
line visible and positioning the print head at the beginning of the next line.
line visible and positioning the print head at the beginning of the next line.
CallDef_local_address
defines the IP address for the connection on the ISDN Primary Rate RAC side
of the link. This IP address is used only when
of the link. This IP address is used only when
CallDef_mode
is set to
slip
,
ppp,
or
autodetect
.
Type
RAC
Values
enabled or disabled
Default
disabled
Lists
RAC Only, Call Defaults, LAT
Type
RAC
Values
enabled or disabled
Default
enabled
Lists
RAC Only, Call Defaults, Cmd Line Editing
Type
RAC
Values
IP address
Default
0.0.0.0
Lists
RAC Only, PPP, SLIP, Sync Call Defaults