Nortel 4000 用户指南
Managing Remote Access Concentrators Using Annex Manager
Appendix A RAC Parameters
A-38
cli_imask7
allows a RAC to mask CLI input to seven bits. If you choose
disabled
, the RAC
expects eight-bit ASCII input. You should not choose
enabled
unless the terminal
attached to the port can transmit only seven-bit characters.
cli_inactivity
specifies the amount of time in minutes that the RAC remains idle before
disconnecting a CLI session from a port. Entering
disconnecting a CLI session from a port. Entering
0
disables the timer; entering
255
causes the RAC to disconnect as soon as it exits from its last job. Unlike
inactivity_timer
, this timer does not disconnect a CLI session with active jobs.
cli_interface
allows you to control the prompt that appears for VMS or UNIX environments.
If you enter
If you enter
uci
, this parameter provides a standard UNIX interface, with prompts
defined by the
cli_prompt
and
prompt
parameters. If you enter
vci
, the standard
VMS interface includes the
Local>
prompt followed by the
Username>
prompt.
Type
Async
Values
enabled or disabled
Default
disabled
Lists
Async Port, Basic Async Port, Modem, Modem Internal
Type
Async
Values
0 to 255 minutes
Default
0 minutes
Lists
Async Port, Idle Time, Modem, Modem Internal
Type
Async
Values
vci or uci
Default
uci
Lists
Async Port