Nortel 4000 用户指南
A-43
Appendix A RAC Parameters
Managing Remote Access Concentrators Using Annex Manager
default_image_name
contains the name of the image file that is loaded by default when the RAC is
booted.
booted.
default_zone_list
contains the zone list that is sent to AppleTalk clients in case of an ACP failure.
You must use spaces to separate zone names (e.g.,
You must use spaces to separate zone names (e.g.,
general engineering lab
). To
escape embedded spaces within a zone name, use the backslash (\). If you do not
set this parameter, the RAC provides the network zone list.
set this parameter, the RAC provides the network zone list.
demand_dial
allows a port to use demand dialing. You cannot use this parameter unless the
option_key
parameter enables demand dialing.
DHCP_broadcast
determines whether or not a RAC broadcasts for DHCP services if the preferred
DHCP servers are not available.
DHCP servers are not available.
Type
RAC
Values
0 to 100 characters
Default
“ “ (null string)
Lists
RAC Only, Basic RAC
Type
RAC
Values
1 to 100 characters
Default
“ “ (null string)
Lists
RAC Only, AppleTalk
Type
Async
Values
enabled or disabled
Default
disabled
Lists
Async Port, PPP, SLIP
Type
RAC
Values
enabled or disabled
Default
disabled
Lists
RAC Only