Nortel 4000 用户指南
A-49
Appendix A RAC Parameters
Managing Remote Access Concentrators Using Annex Manager
hardware_tabs
allows the RAC to convert ASCII tab characters to the correct number of spaces
when a terminal does not support hardware tabs. This parameter works only for
CLI sessions.
when a terminal does not support hardware tabs. This parameter works only for
CLI sessions.
host_table_size
defines the number of entries allowed in the host table. Entering
255
allows an
unlimited number of entries. Entering
254
indicates that there is no host table.
In this case, the RAC requires a name server to resolve every host name.
image_name
provides the file name for the operational code that loads by default when you
boot a RAC. You can enter a name using up to 100 characters.
boot a RAC. You can enter a name using up to 100 characters.
imask_7bits
allows a RAC to mask input to seven bits. If you choose
disabled
, the RAC expects
eight-bit ASCII input.
Type
Async
Values
enabled or disabled
Default
enabled
Lists
Async Port, Command Line Editing
Type
RAC
Values
0 to 255
Default
64
Lists
RAC Only, Modem
Type
RAC
Values
1 to 100 characters
Default
“ “ (null string)
Lists
RAC only
Type
Async
Values
enabled or disabled
Default
disabled
Lists
Async Port, Basic Async Port