Nortel 4000 用户指南

下载
页码 351
A-81
Appendix A    RAC Parameters
Managing Remote Access Concentrators Using Annex Manager
pri_dsx1_line_length
defines the length, in meters, of the line from a RAC or an ISDN Primary Rate
RAC to an external CSU. The value is used when a dsx1 line driver is configured.
Use the default value for a RAC with an internal CSU.
pri_ipx_network
defines a unique network number for an IPX PPP connection to a RAC or an
ISDN Primary Rate RAC. The number is negotiated when the IPX PPP
connection is established. If the number at one end is zero (0), the number at the
other end is used. You can enter an 8-digit hexadecimal number here.
pri_ipx_node
defines a unique node number for an IPX PPP connection to a RAC or an ISDN
Primary Rate RAC. You can enter a 12 digit hexadecimal number here, using
dashes to separate sets of two numbers (e.g., 00-00-00-00-00-00). You cannot
use a number that has 1 in the last bit of the first octet, since these numbers are
reserved for multicast addresses, or
0xFF-FF_FF_FF_FF_FF, which is reserved as a broadcast node address.
Type
RAC
Values
r0-25, r26-65, r66-100, r101-135, r136-165, r166-185,
r186-210
Default
r0-25
Lists
DS1 Line, PRI_Line
Type
RAC
Values
0x 00000001to 0xFFFFFFFF
Default
00000000
Lists
DS0 Channel, Channel
Type
RAC
Values
0x00-00-00-00-00-00 to 0xFF-FF-FF-FF-FF-FE
Default
00-00-00-00-00-00
Lists
DS0 Channel, Channel