Nortel 5399 安装指南
Model 5399 Remote Access Concentrator Module Hardware Installation Guide
Chapter 4 Troubleshooting Procedures
4-16
For hosts that may limit file names to 14 characters (e.g., System V hosts),
a dump creates two additional directories under /usr/spool/erpcd/bfs.
The name of the first directory is dump; the second directory uses the
Remote Access Concentrator’s IP network address as its name. The dump
file uses the Remote Access Concentrator’s IP host address as its name.
For example: /usr/spool/erpcd/bfs/dump/192.9.200/5.
a dump creates two additional directories under /usr/spool/erpcd/bfs.
The name of the first directory is dump; the second directory uses the
Remote Access Concentrator’s IP network address as its name. The dump
file uses the Remote Access Concentrator’s IP host address as its name.
For example: /usr/spool/erpcd/bfs/dump/192.9.200/5.
The tftp dump names are user-defined. If a name is not
specified, the Remote Access Concentrator uses the bfs
convention.
specified, the Remote Access Concentrator uses the bfs
convention.
Each dump file contains a complete image of the Remote Access
Concentrator RAM memory and hardware state. The amount of space
required for a dump file varies according to the port configuration. The
ROM Monitor config command displays the amount of memory for the
Remote Access Concentrator.
Concentrator RAM memory and hardware state. The amount of space
required for a dump file varies according to the port configuration. The
ROM Monitor config command displays the amount of memory for the
Remote Access Concentrator.
shows sample dump file names. All pathnames are relative to
the file /usr/spool/erpcd/bfs.
Table 4-6. Remote Access Concentrator Dump File Naming Conventions
Remote Access
Concentrator
Address
Concentrator
Address
Network
Address
Address
BSD
Filename
Filename
System V Pathname
63.0.0.75
63
dump.63.0.0.75
dump/63/0.0.75
131.140.23.1
131.140
dump.131.140.23.1
dump/131.140/23.1
195.46.2.15
195.46.2
dump.195.46.2.15
dump/195.46.2/15