Nortel 5399 安装指南

Model 5399 Remote Access Concentrator Module Hardware Installation Guide

Chapter 2 Installing the Model 5399 Remote Access Concentrator Module

2-22

17. To verify and record the unit’s Ethernet address, type addr -

d and press

at the monitor prompt:

The screen display looks similar to this:

18. Verify that the Remote Access Concentrator is on-line by

entering the net command. The following prompt appears:

Enter Segment to be used [1]:

A “pass” or “fail” message is displayed. If fail is displayed, try
verifying the network from another device.

Once the Remote Access Concentrator is on-line, you can download the
image software to the server (see

Return

monitor:: addr -d

Ethernet address (hex): 00-80-2d-XX-XX-XX

Internet address: <uninitialized>

Subnet mask: 255.255.0.0

Broadcast address: 0.0.0.0

Preferred Load Host address: <any host>

Preferred Dump Host address: 0.0.0.0

Load/Dump Gateway address: 0.0.0.0

Type of IP packet encapsulation: <ethernet>

Load Broadcast: Y