Nortel 5399 快速安装指南
11
Quick-Start Guide for Remote Access Concentrators
118352-A Rev. A
Task 12: Reboot the RAC
After making configuration changes, you must reboot the RAC for the
changes to take effect. After you reboot the RAC:
changes to take effect. After you reboot the RAC:
1.
Connect the cables to the WAN interface ports on the front
(Model 5399) or back (Model 8000) of the RAC.
(Model 5399) or back (Model 8000) of the RAC.
2.
Test the RAC by dialing in to it.
Task 13: Customizing the RAC
After installing and booting the RAC, you can customize RAC parameters
(for example security or port parameters) using one of the following tools:
(for example security or port parameters) using one of the following tools:
•
CLI interface (see Managing Remote Access Concentrators
Using Command Line Interfaces)
Using Command Line Interfaces)
•
Annex Manager (see Managing Remote Access
Concentrators Using Annex Manager)
Concentrators Using Annex Manager)
•
Quick2Config Annex (see the online Help system)