Nortel 5399 参考指南
7
Parameter 1
Model 5399 RAC Digital Modem Configuration Notes
Parameter 1
Default config_bytes Setting:
Decimal base: 13
Octal base: 015
Hexadecimal base: 0xD
Octal base: 015
Hexadecimal base: 0xD
D: V42 Detection - (Changing this option from its default value is not
recommended.) This option causes the modem to skip the V.42
detection phase. It may be required for compatibility with some older
non-standard modems that expect V.42 detection to be performed
during the V.8 sequence.
0: Disable
1: Enable
detection phase. It may be required for compatibility with some older
non-standard modems that expect V.42 detection to be performed
during the V.8 sequence.
0: Disable
1: Enable
B: V42 Break - A break is an attention key provided on some keyboards
for interrupting a transmission from a host. Breaks were widely used
by terminals communicating with mainframe computers, but are
rarely used in modern applications such as Internet browsing. A break
character consists of several character periods of constant Space bits.
Table 1 and Table 2 below describe how the modem handles a break
character:
0: Disable - Will not forward a break
1: Destructive/Expedited
10: Nondestructive/Expedited
11: Nondestructive/Nonexpedited
by terminals communicating with mainframe computers, but are
rarely used in modern applications such as Internet browsing. A break
character consists of several character periods of constant Space bits.
Table 1 and Table 2 below describe how the modem handles a break
character:
0: Disable - Will not forward a break
1: Destructive/Expedited
10: Nondestructive/Expedited
11: Nondestructive/Nonexpedited
Bit
15 14 13 12 11 10 9 8 7 6 5 4
3
2 1 0
Value
0
0
0
0
0
0
0 0 0
0 0 0
1
1 0 1
Descr.
Unused
Reserved
SR
B
D