Nortel 8300 安装指导
24
Small form factor pluggable transceivers
The following figure shows the 1000BASE-SX MT-RJ SFP. Push the tab
to release the device.
to release the device.
Figure 2
1000BASE-SX MT-RJ SFP extraction mechanism
1000BASE-SX MT-RJ SFP extraction mechanism
The following figure shows the wrap-around latch-type extraction
mechanism. To remove the device, push the collar towards the module.
mechanism. To remove the device, push the collar towards the module.
Figure 3
Wrap-around latch-type extraction mechanism
Wrap-around latch-type extraction mechanism
Removing an SFP
Remove an SFP to replace it or to commission it elsewhere.
Procedure steps
Step
Action
1
Disconnect the network fiber cable from the SFP connector.
2
Affix dust covers over the fiber optic bore and connector.
Nortel Ethernet Routing Switch 8300
Installation — SFPs and XFPs
NN46200-307
01.02
Standard
4.0
27 August 2007
Copyright © 2007, Nortel Networks
.