Nortel 8300 用户指南
Configuring Simple Loop Prevention Protocol
107
3
Double-click the SlppEnable box for a port and select true to enable
SLPP.
SLPP.
4
Click Apply.
—End—
describes the Slpp, Ports
tab fields.
Table 21
SLPP - Ports tab fields
SLPP - Ports tab fields
Field
Description
IfIndex
Specifies the interface index number for a port.
PktRxThreshold
Specifies the threshold for packet reception
from 1 – 500. After a port reaches the packet
threshold, it is disabled.
from 1 – 500. After a port reaches the packet
threshold, it is disabled.
SlppEnable
Enables or disables SLPP on the selected
IfIndex.
IfIndex.
IncomingVlanId
VLAN ID of the classified packet on a port
disabled by SLPP.
disabled by SLPP.
SrcNodeType
Specifies the source node type of the received
SLPP packet.
SLPP packet.
Nortel Ethernet Routing Switch 8300
Configuration — VLANs, Spanning Tree, and Static Link Aggregation using Device Manager
NN46200-510
03.01
Standard
4.0
27 August 2007
Copyright © 2005-2007, Nortel Networks
.