Nortel 8300 用户指南
Split MultiLink Trunking
39
Figure 10
8300 switches as SMLT aggregation switches
8300 switches as SMLT aggregation switches
Other SMLT aggregation switch connections
also
includes end stations connected to each of the switches.
In this example, a, b1, b2, c1, c2, and d are clients and printers, while e and
f can be servers or routers.
f can be servers or routers.
Edge switches B and C can use any method for determining a link of their
multilink trunk connections to use for forwarding a packet, as long as the
same link is used for a given Source/Destination (SA/DA) pair. This is true,
regardless of whether or not the DA is known by B or C. SMLT aggregation
switches always send traffic directly to an edge switch and only use the IST
for traffic that they cannot forward in another more direct way.
multilink trunk connections to use for forwarding a packet, as long as the
same link is used for a given Source/Destination (SA/DA) pair. This is true,
regardless of whether or not the DA is known by B or C. SMLT aggregation
switches always send traffic directly to an edge switch and only use the IST
for traffic that they cannot forward in another more direct way.
The examples that follow explain the process in more detail:
•
•
•
•
Nortel Ethernet Routing Switch 8300
Configuration — VLANs, Spanning Tree, and Static Link Aggregation using Device Manager
NN46200-510
03.01
Standard
4.0
27 August 2007
Copyright © 2005-2007, Nortel Networks
.