Nortel 8300 用户指南
50
VLANs, Spanning Tree, and Static Link Aggregation
Figure 18
Changing a split trunk from MLT-based SMLT to single port SMLT
Changing a split trunk from MLT-based SMLT to single port SMLT
SMLT network design considerations
Use the following base guidelines when designing an SMLT network (for
more information, refer to Nortel Ethernet Routing Switch 8300 Planning
and Engineering — Network Design Guidelines (NN46200-200)).
more information, refer to Nortel Ethernet Routing Switch 8300 Planning
and Engineering — Network Design Guidelines (NN46200-200)).
Step
Action
1
Define a separate VLAN for the IST protocol:
config mlt 1 ist create ip <value> vlan-id <value>
2
Enable tagging on IST trunk links:
Nortel Ethernet Routing Switch 8300
Configuration — VLANs, Spanning Tree, and Static Link Aggregation using Device Manager
NN46200-510
03.01
Standard
4.0
27 August 2007
Copyright © 2005-2007, Nortel Networks
.