Nortel 8300 发行公告
11
Introduction
This document discusses the following topics:
•
•
•
•
•
•
•
•
The information in this document is current up to the most recent release of
Ethernet Routing Switch 8300 Software. See
Ethernet Routing Switch 8300 Software. See
for
links to the most current documentation and software.
Preventing and diagnosing module failures
To prevent apparent failures of properly functioning modules, after you install
the modules in a chassis, securely tighten all the module retaining screws to
provide a good connection between the module and the backplane.
the modules in a chassis, securely tighten all the module retaining screws to
provide a good connection between the module and the backplane.
If a module failure occurs, check for possible backplane connection
problems. Ensure the module is correctly seated in the backplane connector
and the retaining screws are securely tightened. If, after a positive
backplane connection is established, the module fails to operate, contact
Nortel Customer Support for assistance.
problems. Ensure the module is correctly seated in the backplane connector
and the retaining screws are securely tightened. If, after a positive
backplane connection is established, the module fails to operate, contact
Nortel Customer Support for assistance.
Determining hardware and software compatibility
The tables in this section describe Ethernet Routing Switch 8300 Series
Switch hardware and the minimum software version required to support
the hardware.
Switch hardware and the minimum software version required to support
the hardware.
Nortel Ethernet Routing Switch 8300
Important Notice — 8300 Series Modules
NN46200-603
03.01
Standard
4.0
27 August 2007
Copyright © 2005- 2007, Nortel Networks
.