Nortel 450-24t 用户指南

Installing the BayStack 450 Switch

309978-D Rev 01

2-19

Figure 2-14.

IP Configuration/Setup Screen (Standalone Switch)

Enter the IP address of the switch in the In-Band IP Address field, and
then press [Enter].

Enter the IP subnet mask address in the In-Band Subnet Mask field, and
then press [Enter].

Enter the default gateway address in the Default Gateway field, and then
press [Enter].

See Chapter 3, “Using the Console Interface,” for detailed descriptions of the
menus and screens you can use to customize your configuration.

Note:

When you enter the IP address in the In-Band Stack/Switch IP

Address field, and the In-Band Subnet Mask field is not present, the
software provides an in-use default value for the In-Band Subnet Mask
field, based on the class of the entered IP address.

IP Configuration/Setup

BootP Request Mode: [ BootP Disabled ]

                              Configurable          In Use         Last BootP
                           ------------------- ---------------  ---------------
In-Band Stack IP Address:  [ 0.0.0.0 ]                           0.0.0.0
In-Band Switch IP Address: [ 0.0.0.0 ]                           0.0.0.0
In-Band Subnet Mask:       [ 0.0.0.0 ]          0.0.0.0          0.0.0.0
Default Gateway:           [ 0.0.0.0 ]          0.0.0.0          0.0.0.0

IP Address to Ping: [ 0.0.0.0 ]
Start Ping: [ No ]

Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.