Nortel 450-24t 用户指南

Using the BayStack 450 10/100/1000 Series Switch

3-2

309978-D Rev 01

You can access the CI menus and screens locally through a console terminal, 
remotely through a dial-up modem connection, or in-band through a TELNET 
session (see “Console/Comm Port” on page 2-10).

You can also manage the BayStack 450 switch using Nortel Networks Optivity 
network management software or any generic SNMP-based management 
software; however, for the switch management function to become fully 
operational, you must supply certain parameters such as the switch IP address or 
stack IP address, if configured (see “Initial Setup” on page 2-17).

For information about SNMP, see your network management documentation.

The CI menus and screens provide options that allow you to configure and 
manage the BayStack 450 switch.

Help prompts at the bottom of each menu and screen explain how to enter data in 
the highlighted field and how to navigate the menus and screens. Some options 
allow you to toggle among several possible values; other options allow you to set 
or modify a parameter.

If your stack configuration includes one or more Business Policy Switch 

2000 switches, you must use the Business Policy Switch 2000 switch console 
interface to configure or monitor your stack.

If you have a properly configured BootP server in your network, it will 

detect the IP address; you will not need to configure the IP address.