Nortel 450-24t 用户指南
Media Dependent Adapters
309978-D Rev 01
C-21
Figure C-9.
Installing A GBIC
3.
Press on the front of the GBIC until it snaps into place.
4.
Remove the rubber plug from the connectors to connect cables.
Removing an Installed GBIC
To remove an installed GBIC:
1.
If the GBIC has spring tabs, press in on the tabs on each side of the GBIC
as you pull the GBIC out of the MDA’s Host port (Figure C-10).
as you pull the GBIC out of the MDA’s Host port (Figure C-10).
Figure C-10.
Removing a GBIC
2.
If the GBIC has an extractor handle, grasp the handle and pull firmly to
remove the GBIC from the MDA’s Host port.
remove the GBIC from the MDA’s Host port.
9825FA
9826FA