Nortel 1200 补充手册
14
You must connect the converter module to the 200 W AC/DC
Power Supply Module that is already installed in the BayStack
10 PSU. For more information on the BayStack 10 PSU, refer
to Installation and Reference for the BayStack 10 Power Supply
Unit. For information on installing the 200 W AC/DC Power
Supply Module, refer to the section on installing the power
supply modules in that manual.
Power Supply Module that is already installed in the BayStack
10 PSU. For more information on the BayStack 10 PSU, refer
to Installation and Reference for the BayStack 10 Power Supply
Unit. For information on installing the 200 W AC/DC Power
Supply Module, refer to the section on installing the power
supply modules in that manual.
Use the 5-foot connector cable that shipped with the 200 watt
RPS.
RPS.
1
Ensure that one end of the cable is connected to the 200 watt
RPS in the BayStack 10 PSU.
RPS in the BayStack 10 PSU.
2
Connect the other end of the cable to the converter module
in the OPTera Metro 1200 Ethernet Service Module.
in the OPTera Metro 1200 Ethernet Service Module.
Caution:
Do not attempt to use any other cables to
connect the modules. Using the incorrect cable may
damage the modules and invalidate the warranty for this
product.
damage the modules and invalidate the warranty for this
product.