Nortel 8100 用户指南
Chapter 4 Configuring and graphing ports
121
Configuring Network Management
Table 25
VRRP tab fields
Field
Description
Vrld
A number that uniquely identifies a virtual router on
a given VRRP router. The virtual router acts as the
default router for one or more assigned addresses
(1 to 255).
IpAddr
IP address of the virtual router interface.
VirtualMacAddr
The virtual MAC address of the virtual router. The first
three octets consist of the IANA's OUI, the next two
octets indicate the address block of the VRRP protocol,
and the remaining octets consist of the VRID (for
example, 00-00-5E-00-01-<
vrid
>).
State
The current state of the virtual router. This is a read-only
field. The valid options are
• initialize (1) -- the virtual router is starting up
• backup (2 -- the virtual router is monitoring the state/
• initialize (1) -- the virtual router is starting up
• backup (2 -- the virtual router is monitoring the state/
availability of the master router
• master (3) -- the virtual router is functioning as the master
router
Control
Whether VRRP is enabled or disabled for the port
or VLAN.
Priority
Priority value to be used by this VRRP router. Set a
value from 1 to 255, where 255 is reserved for the
router that owns the IP addresses associated with
the virtual router. The default is 100.
MasterIpAddr
The master router’s real (primary) IP address. This is the
IP address listed as the source in VRRP advertisement
last received by this virtual router. This is read-only field.
FastAdvertisementEnable
Enables or disables the Fast Advertisement
Interval.
When disabled the regular advertisement interval is
used. Default is disable.
AdvertisementInterval
The time interval (in seconds) between sending
advertisement messages. Set from 1 to 255
seconds with a default of 1 second. Only the
master router sends advertisements.