Nortel 8600 用户手册

Using the toolbar

Menu

Description

Edit

The Edit menu lets you view parameters for the chassis or
for selected objects, such as ports. This menu also lets you
set security parameters, run diagnostic tests, and select all
objects in the device.

Graph

The Graph menu lets you view chassis or port statistics.

IP VLAN

The IP VLAN menu lets you set up VLANS for the switch.

IP Routing

The IP Routing menu lets you set up IP routing and Quality of
Service (QoS) functions for the switch. It also allows you to
perform traffic control.

Layer 2

The Layer 2 menu lets you set up FDB, GVRP, Internet
Group Membership Protocol (IGMP), Multicast FDB, port
mirroring, Spanning Tree, and current and static VLANs for
Layer 2 mode. The device must be reset for Layer 2 for this
menu to function.

QinQ

The Q-in-Q menu lets you set up a VLAN for Q-in-Q mode
(applies to the ESU 1850 only).

Packet
Classification

The Packet Classification menu lets you perform filtering,
metering, packet classification, and packet policing.

Rmon

The RMON menu lets you set up and view remote monitoring
(RMON) alarms.

Rapid Ping

The Rapid Ping menu lets you test traffic data issues such as
connectivity, latency, and packet loss.

Actions

The Actions menu provides quick access to selected actions
without going through other menus and submenus. Use this
menu to open the Web management interface and save
runtime configurations.

Help

The Help menu lets you view online Help topics for Device
Manager. This menu also provides a legend for the port
colors in the device view.

Using the toolbar

The toolbar buttons provide quick access to commonly used commands and
some additional actions for the Metro Ethernet Routing Switch 8600, Metro
ESU 1800, and Metro ESU 1850.

describes the toolbar buttons for the Metro Ethernet Routing Switch 8600,
and Metro ESU 1800 and 1850.

Nortel Metro Ethernet Routing Switch 8600

Fundamentals — Using Device Manager

NN46225-300

02.02

Standard

4.2

1 October 2007