Nortel 15000 用户手册
2
302771-E Rev 00
Quick Reference for the Versalar Switch Router 15000
The
mct3
object stands for multichannel T3. (
does not show the configurable
objects under the
ppp
object.)
The following example shows how to configure these services:
box#
ethernet slot 9 connector 1
ethernet/9/1#
ip 11.23.13.14/8
ip/11.23.13.14/255.0.0.0#
rip
rip/11.23.13.14#
box
box#
mct3 slot 1 connector 1
mct3/1/1#
t3
t3/1/1#
ppp
ppp/1/1#
The BCC creates a unique identifier for each object that you add to the tree. The ID
consists typically of the object name plus any parameter values required for configuration,
such as in the example above,
consists typically of the object name plus any parameter values required for configuration,
such as in the example above,
ethernet/9/1
. The slash (/) characters are part of the ID.
When the BCC is in configuration mode, you can go to any configured object by entering
its unique ID after any prompt, regardless of your current position in the configuration
tree. For example, enter ip/11.23.13.14/255.0.0.0 to go to the IP interface configured on
its unique ID after any prompt, regardless of your current position in the configuration
tree. For example, enter ip/11.23.13.14/255.0.0.0 to go to the IP interface configured on
ethernet/9/1
.
As you navigate between levels of the tree, the BCC prompt changes to show the unique
ID of the object configured at your current location. (Refer to the previous configuration
example to see how the prompt changes.)
ID of the object configured at your current location. (Refer to the previous configuration
example to see how the prompt changes.)
The lso command displays the unique identifiers of branch objects configured
immediately below your current location in the tree. If you do not know the unique ID of
an object, enter
immediately below your current location in the tree. If you do not know the unique ID of
an object, enter
lso -r
after the
box#
prompt to display the configuration object IDs
recursively.
When you add IP to an interface, the BCC accepts the subnet mask value in either
dotted-decimal notation (for example, 255.255.255.0) or in standard decimal notation (for
example, 24, representing the number of contiguous bits reserved for the network portion
of the IP interface address). For example, enter any of the following commands to create
an object with the unique ID
dotted-decimal notation (for example, 255.255.255.0) or in standard decimal notation (for
example, 24, representing the number of contiguous bits reserved for the network portion
of the IP interface address). For example, enter any of the following commands to create
an object with the unique ID
ip/11.23.13.14/255.0.0.0
:
ip address 11.23.13.14 mask 255.0.0.0
ip address 11.23.13.14 mask 8
ip 11.23.13.14/255.0.0.0
ip 11.23.13.14/8
ip address 11.23.13.14 mask 8
ip 11.23.13.14/255.0.0.0
ip 11.23.13.14/8
When you use BCC to create a configuration, the BCC prompts you for parameter values
that it cannot automatically assign. To change a parameter value, you enter the name of the
parameter, a space, and the new value.
that it cannot automatically assign. To change a parameter value, you enter the name of the
parameter, a space, and the new value.
shows each help configuration task, the associated command, and examples.