Nortel 15000 参考指南
show ip ospf io
308689-B Rev 00
85
show ip ospf io
The
show ip ospf io
command displays the number and types of OSPF packets
that the router has sent and received. The output includes the following
information:
information:
show ip ospf lsdb
The
show ip ospf lsdb
command displays information from the OSPF Link State
Database (LSDB). This command allows for the following options:
Retrans
Number of Retrans messages received.
OSPF Virtual Interfaces
Area ID
Identifier of the transit area that the virtual link traverses.
Virtual Neighbor
Router ID of the virtual neighbor.
State
State of the virtual interface: Down or Point-to-Point.
Interface
IP address of the OSPF interface.
Hellos Rx/Hellos Tx
Number of OSPF Hello packets sent and received.
DBs Rx/DBs Tx
Number of OSPF database description packets sent and
received.
received.
LS Req Rx/LS Req Tx
Number of OSPF link state request packets sent and
received.
received.
LS Upd Rx/LS Upd Tx
Number of OSPF link state update packets sent and
received.
received.
LS Ack Rx/LS Upd Tx
Number of OSPF link states acknowledgements sent and
received.
received.
Drop
Number of OSPF messages dropped.
<ip_address>
Displays OSPF link state data for the specified IP
address.
address.
<
ip_address/prefix
>
Displays OSPF link state data for IP addresses with the
specified address mask.
specified address mask.
-a
Displays the OSPF area.
-A
Displays the entire link state advertisement.