Nortel 15000 参考指南
![Nortel](https://files.manualsbrain.com/attachments/41d8158aa9dad39109585817452a5513bedfdded/common/fit/150/50/b0df237683acfcba182fca1886fb0237fc1e06fba6e3e77a0d64d1463e4c/brand_logo.jpeg)
show ip summary
96
308689-B Rev 00
All Subnets
Administratively controls the use of the zero and all-ones
subnets for configured IP interfaces.
subnets for configured IP interfaces.
Directed Broadcast
Administratively controls whether or not received packets
with a destination address corresponding to an interface
directed broadcast address are forwarded.
with a destination address corresponding to an interface
directed broadcast address are forwarded.
ARP % Buffer Limit
Defines the upper limit (in percent) of buffers that can be
used by ARP when resolving an ARP request.
used by ARP when resolving an ARP request.
ICMP Error Limit
Maximum number of ICMP messages that can be
transmitted within a 1 second interval in any individual
interface. If it is set to 0, rate limiting is disabled.
transmitted within a 1 second interval in any individual
interface. If it is set to 0, rate limiting is disabled.
ECMP Method
Method used to choose next hop when more than one is
available. Possible values here are: disabled (1),
round-robin (2), src-dest-hash (3), or dest-hast (4).
Round-robin sends each packet destined for a given
destination to a different next hop until all have been
used, then repeats this process through the list of next
hops.
available. Possible values here are: disabled (1),
round-robin (2), src-dest-hash (3), or dest-hast (4).
Round-robin sends each packet destined for a given
destination to a different next hop until all have been
used, then repeats this process through the list of next
hops.
Src-dest-hash uses a single next hop for all traffic
originating at one given IP address and addressed to
another given IP address. Dest-hash is similar. However,
it uses only the destination’s IP address to compute the
next hop.
originating at one given IP address and addressed to
another given IP address. Dest-hash is similar. However,
it uses only the destination’s IP address to compute the
next hop.
Maximum RIP Paths
Maximum number of equal cost paths allowed for a
network installed by RIP up to a maximum of 12 next
hops.
network installed by RIP up to a maximum of 12 next
hops.
Maximum OSPF Paths
Maximum number of equal cost paths allowed for a
network installed by OSPF up to a maximum of 12 next
hops.
network installed by OSPF up to a maximum of 12 next
hops.
Maximum ISIS Paths
Maximum ISIS paths allowed for a network installed by
ISIS up to a maximum of 12 next hops.
ISIS up to a maximum of 12 next hops.