Nortel 15000 参考指南
![Nortel](https://files.manualsbrain.com/attachments/41d8158aa9dad39109585817452a5513bedfdded/common/fit/150/50/b0df237683acfcba182fca1886fb0237fc1e06fba6e3e77a0d64d1463e4c/brand_logo.jpeg)
show t1 summary
168
308689-B Rev 00
The Admin/Oper State output field indicates whether or not the queue is up. In the
first example that follows, the queue within the service package has been created
successfully, but it has not come up on the line. The line is in state quemisCfg
because there is a conflicting class and the queue is improperly configured. In
such cases, the Versalar 15000 has run out of available queues.
first example that follows, the queue within the service package has been created
successfully, but it has not come up on the line. The line is in state quemisCfg
because there is a conflicting class and the queue is improperly configured. In
such cases, the Versalar 15000 has run out of available queues.
In the case of multiple queues, the
show t1 summary
command may indicate that
the fourth queue on the line is not configured properly. If so, the T1 line attempts
to get only three queues and not four. Thus, if the state of the line is up, the T1 line
gets all 3 queues. By contrast, if the configuration is incorrect and you attempt to
use more queues than the access card can distribute, the T1 line enters a queue
misconfigured state.
to get only three queues and not four. Thus, if the state of the line is up, the T1 line
gets all 3 queues. By contrast, if the configuration is incorrect and you attempt to
use more queues than the access card can distribute, the T1 line enters a queue
misconfigured state.
The
show t1 summary
command then produces the following output indicating
that the line did not come up. In such cases, there are three queues created
successfully within the service package. All three queues have not come up on the
line, however. Unless the driver is able to obtain all of the queues for a line, it will
not come up successfully.
successfully within the service package. All three queues have not come up on the
line, however. Unless the driver is able to obtain all of the queues for a line, it will
not come up successfully.
show t1 summary T1-1/3/28
T1 Summary
---------------------------------------------------------------
Name
------
Slot/Conn/
Channel
------
Admin/Oper
State
---------
QoS
Package
-----
WAN
Protocol
-----
CRC
---
Rate
Adaption
------
T1-1/3/28
1/3/28
enabled/
quemisCfg
four-queue
ppp
CRC-16
64K
show t1 summary T1-1/3/28
T1 Summary
---------------------------------------------------------------
Name
------
Slot/Conn/
Channel
------
Admin/Oper
State
---------
QoS
Package
-----
WAN
Protocol
-----
CRC
---
Rate
Adaption
------
T1-1/3/28
1/3/28
enabled/
quemisCfg
four-queue
ppp
CRC-16
64K