Nortel 15000 参考指南
show atm line state
12
308689-B Rev 00
show atm line state
The
show atm line state
command displays the ATM line state table. The entries
in this table contain the current configuration state of each ATM line driver. You
can specify any of the following filters (flags) with this command:
can specify any of the following filters (flags) with this command:
The output includes the following information:
Receive Octets
Number of octets received without error.
Transmit Octets
Number of octets transmitted without error.
-disabled
Displays ATM line information for disabled ATM lines only.
-enabled
Displays ATM line information for enabled ATM lines only.
-slot
<name>
Displays ATM line information for the specified slot or
slot/connector pair only.
slot/connector pair only.
Slot/Module/Connector
Slot, module, and connector where the ATM interface is
found.
found.
Circuit
Circuit name assigned to the interface.
Config State
Configured state of the ATM line: enabled or disabled.
Data Path Notify
Data path (DP) notify function. When enabled, it will
disable the DP interface when the interface becomes
nonoperational.
disable the DP interface when the interface becomes
nonoperational.
Data Path Timeout
DP notify function timeout period. It specifies the number
of seconds to wait before implementing the DP notify
function.
of seconds to wait before implementing the DP notify
function.
MTU
Maximum transmission unit (MTU) size for AAL5 user
payload.
payload.